CAB HEKTOR 4 운영 매뉴얼 - 페이지 2

{카테고리_이름} CAB HEKTOR 4에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAB HEKTOR 4 8 페이지. Strip separator

CAB HEKTOR 4 운영 매뉴얼

1. Product Description

Hektor 4 is a tool to separate milled PCB's which are connected by small strips carefully and
economically.
The blades are arranged customized. It depends on the shape and the size of the PCB to be
cut. They are made of special steel and they are low-wear.
The blades are offered in 5 standard width. Special sizes are manufactured by request.
Hektor 4 uses compressed air connection for the operation.
It is recommended to connect an industrial vacuum cleaner. This way the separated pieces
may drawn off right away and it is possible to dispose the pieces immediately.
Hektor 4 is prepared to connect an industrial vacuum cleaner.

2. Technical Specification

Separation principle
Blade
Number of blades
max. 20
Thickness of the PCB
max. 2,0 mm
Compressed air connection
1/4"-coupling plug
Operating pressure
3 - 6 bar
Power supply
115/230 V~ - 50/60 Hz
Operating temperature
15 - 30° C
Storage-and transport temperature
-20 until 85° C
Humidity
10 - 85 %
Suction pipe
Dm. 31 mm
Length x Width x Height (in mm)
500 x 320 x 303

3. Contents of Delivery

Hektor 4
Blades according the order
Service tools
Power cable
2