CAB MAESTRO 4S 운영자 매뉴얼 - 페이지 17

{카테고리_이름} CAB MAESTRO 4S에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAB MAESTRO 4S 20 페이지. Pcb separator

Maintenance

9.6

Adjusting the Linear Blade

Warning!

Risk of cutting injury in handling of the linear blade.

To ensure a constant cutting quality and to prevent damaging of the blades must adjust the linear blade so that the

distance between upper blade and linear blade is constant of the full cutting length.

Fig.16

Setting of the linear blade

(Front view)

1. Decouple the carriage (1) from motor by the lever (3).

2. Turn upward the upper blade by the setting knob on the carriage (1).

3. Pull the carriage (1) over the full cutting length. The Distance between upper blade and linear blade (2) must be

constant over the full length.

4. Repeat this activity with reduced distance between upper blade and linear blade (2) up to a possible variation in

the distance is visible.

5. Are variation in the distance visible, loosen screws (5).

6. Turn the eccentric (4) to adjust the linear blade (2).The shouldered screw (6) are the axle of rotation and by

turning the eccentric (4) will the linear blade (2) lifted or put down.

7. Repeat the setting and check up to the distance is over the full cutting distance the same.

8. Tighten screws (5).

Fig.17

Setting of the linear blade

(Rear view)