CAB CSQ 402 조립 지침 매뉴얼 - 페이지 17

{카테고리_이름} CAB CSQ 402에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAB CSQ 402 20 페이지.

Maintenance

5.3

Reassembling the blades

The assembly of the cleaned or new blades and the assembly of the cutter is

carried out in the reverse order of disassembly.

1. Put on the upper blade(2) and make sure that the springs (3) should not

be kinked and remain in the guides

2. Fix the upper blade (2) with the screws (1).

3. Push the lower blade (5) in the guides upward until the toothed rail on the

upper blade (5) pushes against the gear wheels on the axle (4).

Then turn the axle (4) clockwise with a 2.5 mm hex wrench until the lower

blade (5) is just before the upper blade (2).

4. Press the upper blade (2) inwardly and slide the lower blade (5) over the

upper blade (2) by turning the axle (4) clockwise to the maximum top.

5. Insert the plug (6) of the motor cable into the socket (7).

6. Mount the cover and attach the CSQ cutter to the printer.

After turning on the printer, the lower blade automatically aligns.