Cisco SLM248P 빠른 시작 매뉴얼 - 페이지 8

{카테고리_이름} Cisco SLM248P에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SLM248P 13 페이지. Smart switch
Cisco SLM248P에 대해서도 마찬가지입니다: 데이터시트 (5 페이지)

If you have changed the switch IP address or are using DHCP to

OTE

assign it, enter the new IP address assigned to the switch. The

ip address of the computer you are using to configure the

switch, must be on the same subnet as the switch.

When the login page appears, enter the user name and password.

TEP

The default user name is

Passwords are case sensitive.

Click Login.

TEP

Follow the on-screen prompts to complete the initial configuration.

TEP

Troubleshooting and

Suggested Next Steps

Verifying the Hardware Installation

To verify the hardware installation, complete the following tasks:

• Check the cable connections.

• Check the LED states, as described in

page

• Connect a computer to an available LAN port and verify that you can

connect to a website on the Internet, such as www.cisco.com.

If you encounter problems, consider the following:

• Reset the switch to its factory default settings by holding down the

reset button for 10 seconds.

• Set a temporary IP address on an attached device within the range of

192. 1 68. 1 .

• Use the ping utility to verify connectivity.

Cisco Small Business SLM Series Smart Switch Installation Guide

and subnet mask of 255.255.255.0.

admin

. The default password is

Getting to Know the Switch,

admin