Cisco Small Business Pro SRP527W 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} Cisco Small Business Pro SRP527W에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Small Business Pro SRP527W 17 페이지. Dot (digital office technology)
Cisco Small Business Pro SRP527W에 대해서도 마찬가지입니다: 사용자 설명서 (27 페이지), 사용자 설명서 (21 페이지)
페이지 인쇄
Front Panel Lights
The following table describes the lights on the front panel of the SRP.
These lights are used for monitoring system activity.
Lights (Green)
POWER/SYS
LAN ports (1–4)
WAN port
(SRP 521W only)
Phone (FXS) ports
(1–2)
DSL CD
DSL Data
(SRP 526W/527W only)
WLAN
USB port
WPS button
Back Panel
The back panel is where you connect the network devices. The ports on
the panel vary depending on the model.
Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520 Models)
Description
Lights when the SRP has successfully booted and is ready
to use. Flashes when the SRP is booting.
Lights when a link is established. Flashes when there is
activity on the LAN port.
Lights when a link established. Flashes when there is
activity on the WAN port.
Lights when the port is connected to a phone or fax
machine and the SRP is able to make and receive calls.
Flashes when a call is in progress on the port.
Flashes when a DSL service is detected. Lights solid green
when synchronized.
Flashes when there is DSL activity on the line.
Lights when the radio is powered on and operational.
Flashes when there is wireless activity on the WLAN port.
Lights when the connected USB device is operational.
Flashes if there is a device failure or unsupported device.
Lights when WiFi Protected Setup (WPS) is operational.
A slow green flash indicates that the setup is in progress. A
fast green flash indicates a setup error.
5