Cisco Small Business Pro SRP527W 사용자 설명서 - 페이지 7
{카테고리_이름} Cisco Small Business Pro SRP527W에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Small Business Pro SRP527W 21 페이지. Dot (digital office technology)
Cisco Small Business Pro SRP527W에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지), 사용자 설명서 (27 페이지)
페이지 인쇄
Section 1. What's in the Box
Section 2. Setting up your system
Section 3. Remote Working
(working away from your office)
Set-up Remote Working on the
Router for your Business
Set-up Remote Working Client
on individual PCs
Using Remote Working
Section 4. Troubleshooting
Section 5. Acronyms, Abbreviations
and Glossary
Previous
Next
Section 3.
Remote Working
(working away from your office)
Remote working allows users to connect to the organisation's
local area network from external locations, for example, from
home. To enable this functionality a username and password
must be created for the organisation and for each individual
user. The organisation is also referred to as the Group.
To setup Remote Working there are two steps involved:
• Setting up Remote Working on the router, and
• Setting up the Remote Working client on individual PCs.
Note: Remote Working is helpful for sharing private data on
your network (for example using a shared hard drive). If you
don't share data then you don't need remote working.
You must use the Self-Installation CD to configure Remote
Working on the router. The Self-Install CD must also be used
to install the remote working software on each user's PC.
Note: Your computer or laptop must meet the following
minimum system requirements in order to install, configure
and use the Remote Working (VPN) feature:
Operating
Computer
Requirements
System
Computer with
Windows
®
7
Microsoft
Pentium class
(32/64 bit)
(Confirm via Start>
processor
Windows Vista
Settings>Control Panel>
or greater,
(32/64 bit)
Network>Protocols or
including
Windows
Configuration)
Tablet PC
XP 32 bit
50 MB Hard Disk space
256 MB RAM
Apple
®
Mac
®
Mac OS X
50 MB Hard Disk space
Version 10.6
PPC or Intel processor
or later
Set-up Remote Working on the
Router for your Business
To set up remote working on the router, do the following:
1. Connect the PC to the Router using an Ethernet cable.
Insert the Self-Install CD.
Windows: The installation will begin automatically. If the
installation does not begin automatically, navigate to the
CD drive on your computer and double-click the file called
setup.exe.
Mac: A DOT icon will appear on your desktop. Double click it
to begin the installation.
2. On the Self-Installation welcome screen, press the Next
button until you arrive at the 'Select Installation Type' page.
®
TCP/IP installed
Figure 7 Installing Remote facilities