Cisco Small Business RV215W 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Cisco Small Business RV215W에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Small Business RV215W 9 페이지. Wireless-n vpn firewall
Cisco Small Business RV215W에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (9 페이지), 빠른 시작 매뉴얼 (2 페이지)

Cisco Small Business RV215W 빠른 시작 매뉴얼
Welcome
Thank you for choosing the Cisco Small Business RV215W Wireless-N
VPN Firewall.
This guide describes how to physically install your Cisco RV215W and
launch the web-based Device Manager.
Installing the Cisco RV215W
1

Placement Tips

To prevent the firewall from overheating or being damaged:
• Ambient Temperature—Do not operate it in an area that exceeds an
ambient temperature of 104°F (40°C).
• Air Flow—Be sure that there is adequate air flow around the firewall.
• Mechanical Loading—Be sure that the firewall is level and stable to
avoid any hazardous conditions.
Place the device on a flat surface so that it sits on its four rubber feet.

Cisco RV215W Features

2

Front Panel

Power
USB
WAN
2
Solid green to indicate the unit is powered on and
booted. Flashes green when the device is
booting or loading the firmware.
Lit green when the corresponding port is
connected to a device. Flashes green when the
port is sending or receiving data.
Solid green when the firewall is connected to the
Internet by using a wired connection. The light is
off when it is not connected to the Internet or it is
connected by using a USB dongle. The light
flashes when it is sending or receiving data over
the wired connection.
Cisco RV215W Wireless-N VPN Firewall