CAB SQUIX CSQ 400 조립 지침 매뉴얼 - 페이지 15

{카테고리_이름} CAB SQUIX CSQ 400에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAB SQUIX CSQ 400 20 페이지.

Maintenance

5.1

Warning!

 Disconnect the printer from the electrical outlet.

Caution!

Risk of injury. The cutter blades are sharp.

To clean the blades, they must be removed.

1. Disassemble the CSQ cutter from the printer.

2. Loosen screws (1) and remove cover (2) towards the front.

3. Pull the plug (3) of the motor cable out of the socket.

4. Using a 2.5mm hex wrench to turn the axle (4) counterclockwise. The

lower blade (5) is moved down until it can be pulled out.

5. Loosen screws (6). Fix the upper blade (7) while the springs (8) press

against the upper blade (7).

6. Remove the upper blade (7) and make sure that the springs (8) do not fall

out.