Cisco Small Business SRP520-U 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} Cisco Small Business SRP520-U에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Small Business SRP520-U 17 페이지. Srp500 series services ready platforms
페이지 인쇄SRP526W-U and SRP527W-U Back Panel
Back Panel Descriptions
Feature
DSL port
SRP526W-U/SRP527W-U only
Phone (FXS) ports (1–2)
Line (FXO) port
WAN (10/100) port
SRP521W-U only
LAN (10/100) ports (1–4)
Selectable WAN/LAN
(10/100) port
On/Off Switch
12V DC power
6
Cisco SRP500 Services Ready Platforms Quick Start Guide (SRP520-U Models)
Line
(FXO)
Port
2
1
DSL
PHONE (FXS)
LINE (FXO)
DSL
Phone
Port
(FXS)
Ports
Description
Connect to a DSL connection.
Connect directly to an analog telephone, fax machine,
or similar device.
If your analog phone requires a separate bell line, you
may need to connect a ring adapter between the SRP
and your phone so that the phone rings when calls are
presented.
Connect to an analog phone line.
Connect to an Ethernet broadband Internet
connection.
Connect to a wired computer and other network
devices.
Port can be used as a WAN Ethernet port if the ADSL
interface is disabled. By default the ADSL port is
enabled, allowing this port to be used for LAN
connectivity. See the SRP500 Administration Guide
for further information.
Powers the SRP on or off.
Connect to the provided power adapter.
4
3
2
LAN/WAN
LAN (10/100)
Selectable
LAN
WAN/LAN
Ports
Port
On/Off
Switch
1
12V DC
Power