Cisco Soho 78 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} Cisco Soho 78에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Soho 78 11 페이지. Cisco 828 router and soho 78 router cabling and setup quick start guide
Cisco Soho 78에 대해서도 마찬가지입니다: 데이터시트 (9 페이지)
페이지 인쇄
Connecting Cables to the Router
Connecting a Terminal or PC
You can connect either a terminal or a PC to the router. Use the terminal or PC to configure the software,
using the command-line interface (CLI), or to troubleshoot problems that arise. To connect a terminal or
PC, follow the steps in
Figure 5
Connecting the Power Supply
To connect the power supply, follow the steps in
Warning
The device is designed to work with TN power systems.
Warning
This product relies on the building's installation for short-circuit (overcurrent)
protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S.
(240 VAC, 16A international) is used on the phase conductors (all current-carrying
conductors).
This equipment is intended to be grounded. Ensure that the host is connected to earth
Warning
ground during normal use.
Cisco 828 Router and SOHO 78 Router Cabling and Setup Quick Start Guide
6
Figure
5.
Connecting a Terminal or PC
TO HU B
ET HE RN
M o d e l C
TO PC
ET 10 BA
is c o 8 2 8
SE T
CO NS OL
E
4
3
2
1
1. Connect light blue cable
to CONSOLE port.
2. If necessary, connect other end of
cable to DB-9-to-RJ-45 adapter.
Cisco 828 router
G. SH DS
L
+5 VD C
3. Connect DB-X
connector to
terminal or PC.
DB-X-to-RJ-45
adapter
Figure
6.
78-12839-01