Cisco SOHO 96 릴리스 정보 - 페이지 4
{카테고리_이름} Cisco SOHO 96에 대한 릴리스 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SOHO 96 15 페이지. Secure broadband routers
Cisco SOHO 96에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 사양 (9 페이지)
페이지 인쇄
Correction of the Switch
It appears on page 2-4, Chapter 2 Installation of the Cisco 836 Router and SOHO 96 Router Hardware
Installation Guide and page 22 of the Regulatory Compliance and Safety Information for Cisco 800
Series and SOHO Series Routers. The warning is not necessary because the ISDN cable does not connect
to the ISDN wall jack directly, instead, it connects to a NT1 box first, and the NT1 box to the ADSL
splitter. The ADSL splitter then connects to the ISDN wall jack through an unshielded Category 5 cable.
Therefore, no network hazardous voltages are present in the ISDN cable.
Correction of the Switch
The switch cover wording on the back panel of the Cisco 831, 836 and 837 routers, and the Cisco SOHO
91, 96 and 97 routers is not correct. The words "ON" and "OFF" shown on the switch cover should be
"1" and "0" as depicted in
represents power off. The back panel of the Cisco 831, 836 and 837 routers is almost identical to the
back panel of the Cisco SOHO 91, 96 and 97 routers. The change on the switch cover will not affect any
functionality of the router.
Figure 1
Figure 2
Release Notes for the Cisco 831, 836 and 837 Routers and SOHO 91, 96 and 97 Routers
4
Figure
1,
Back Panel of the Cisco 837 Router
E T H E R N
E T
C O N S O LE
4
3
2
1
1
3
5
2
4
Back Panel of the Cisco 831 Router
E T H E R N
E T 10 B A S
E T
C O M P U T
E R S (E 0)
C O N S O LE
4
3
2
1
1
3
5
2
4
Figure
2, and
Figure
3. "1" represents power on, while "0"
C i s c o 8 3 7
A D S L
6
C is c o 8 3 1
E T H E R N
E T 10 B A S
E T
IN T E R N E
T (E 1)
6
+ 18 V D C
7
8
+ 18 V D C
7
8
78-15225-03