Cisco SOHO 97 설정 매뉴얼 - 페이지 6
{카테고리_이름} Cisco SOHO 97에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SOHO 97 9 페이지. Secure broadband routers
Cisco SOHO 97에 대해서도 마찬가지입니다: 사양 (9 페이지), 릴리스 정보 (15 페이지)
페이지 인쇄Configure the Router
Figure 1-4
If the CRWS dashboard page does not appear when you enter the URL http://10.10.10.1, test the
Tip
connection between the PC and the router by doing the following:
Check that the OK LED on the router is on, and check the cable connection between the router and
•
the PC.
If the CRWS home page still does not appear, verify that the web browser's "work offline" option
•
is disabled.
If the web page still does not appear, verify that the PC is configured to automatically receive an IP
•
address. Select Start/Run, type winipcfg in the Run window, and examine the address in the IP
address field. The address should be in the format 10.10.10.X, in which X is a number that is 2 or
greater; for example, 10.10.10.2 or 10.10.10.3. If the IP address is not in this format, Follow the
instructions in the
start CRWS again.
If you have no special configuration requirements, click the Router Setup link on the home page, and
Step 4
then click Quick Setup. Then, enter the username and password provided to you by your Internet service
provider and follow the instructions that appear in the page that is displayed.
Step 5
If you need to configure special features such as Network Address Translation (NAT), click the
appropriate links on the home page, and complete the configuration screens.
Click the Router Password link on the home page, and set a password for the router.
Step 6
Cisco 837 Router and Cisco SOHO 97 Router Cabling and Setup Quick Start Guide
1-6
CRWS Dashboard Page
Tip on page 1-7
Chapter 1
Cisco 837 Router and Cisco SOHO 97 Router Cabling and Setup
to configure the PC to obtain an IP address automatically. Then
78-14782-07