3Com 3040 시작하기 매뉴얼 - 페이지 7

{카테고리_이름} 3Com 3040에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com 3040 17 페이지. 3000 adsl2 plus family
3Com 3040에 대해서도 마찬가지입니다: 릴리스 노트 (7 페이지), 데이터시트 (4 페이지), 데이터시트 (4 페이지)

3Com 3040 시작하기 매뉴얼
3Com Router 3000 ADSL2+ Family Getting Started Guide

2. Installing the Router

You can place your router on a sturdy tabletop or workbench or mount it on a vertical surface.

Placing the Router on a Tabletop/Workbench

When placing the router on a tabletop or workbench,
Make sure that the tabletop or workbench is clean, flat, and sturdy.
Allow 10 cm (3.9 in.) of clearance around the sides of the chassis.
Do not stack multiple routers together.

Mounting the Router on a Vertical Surface

Mount the router on a vertical surface with four pan-head screws and the four brackets at the
bottom of the router.
Caution:
Securely anchor these four mounting screws in the vertical surface. If the screws are not
properly anchored, strain of the network cable connections can pull the router from the wall.
Install the router in such a position that the LEDs can be read easily.
Securely fix the external power supply unit of the router, preventing the power cord from falling
down.
Follow these steps to mount the router on a wall or other vertical surface:
Step 1: Install four pan-head screws on a wall or other flat vertical surface (with reference to the
distance between the four brackets as shown below), and ensure that each screw sticks
out 6 mm (0.24 in.) on the wall.
Step 2: Hang the router on the screws by the four brackets.
Chassis bottom view
5