Cisco uBR10012 Universal Broadband Router UBR10-FAN-CAB= 설치 매뉴얼 - 페이지 14
{카테고리_이름} Cisco uBR10012 Universal Broadband Router UBR10-FAN-CAB=에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco uBR10012 Universal Broadband Router UBR10-FAN-CAB= 26 페이지. Cisco systems cisco ubr10012 universal broadband router installation guide
페이지 인쇄
Installing the Fan Assembly Modules in the Chassis
Installing the Fan Assembly Modules in the Chassis
This procedure is applicable to both the fan assembly modules (UBR10-FAN-ASSY= and
UBR10012-FAN-PLUS=).
Install the Fan Assembly Module
Prerequisites
•
•
Figure 4
1
Caution
Do not remove the required EMI gaskets on the UBR10012-FAN-PLUS= fan assembly module (see
Figure
The EMI gaskets present on the Cisco uBR10012 router chassis are used with the UBR10-FAN-ASSY=
fan assembly module (see
Gaskets and RF Absorber Material on the Cisco uBR10012 Universal Broadband
Cisco uBR10012 Universal Broadband Router Fan Assembly Module
14
If you are installing the fan module (UBR10012-FAN-PLUS=, Spare) in an existing
Cisco uBR10012 router chassis, ensure that the PRODUCT ID LED/switch activation status is in
accordance with the Cisco IOS Release running on the chassis (see
The UBR10012-FAN-PLUS= fan assembly module is preinstalled with EMI gaskets (see
If you are installing the fan module (UBR10012-FAN-PLUS=, Spare) in an existing
Cisco uBR10012 router chassis, ensure that the EMI gaskets on the Cisco uBR10012 router chassis
(if present) are removed before mounting the fan assembly module.
EMI Gasket Location on UBR10012-FAN-PLUS= Fan Assembly Module
1
1
EMI gaskets across the top and bottom flanges
of the fan assembly module
4).
Figure
—
5). For information about installing EMI gaskets, see
Table 2
for details).
Figure
Installing EMI
Router.
OL-5093-02
4).