CAB ST4/M 운영자 매뉴얼 - 페이지 9

{카테고리_이름} CAB ST4/M에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAB ST4/M 16 페이지. Stacker with cutter

Installation

2.3

Mounting the Stacker to the Printer

Attention!

 Disconnect the printer from the electrical outlet before mounting or removing the stacker.

Caution!

Risk of tilting.

When using the stacker with printers of the A+ series the stacker protrudes the base plate of the printer.

Therefore the system must be positioned at the edge of the platform or on a mounting unit.

 Position the system in such a way that a risk of tilting will be avoided.

1 2

Figure 6

Mounting the stacker

1. Insert the pins (4) of the stacker into the holes (1) of the printer.

2. Press the stacker against the printer. That way the plug (5) of the stacker will be connected to the peripheral port

(2) of the printer.

3. Secure the stacker with the screw (6).

4 5 4