Cisco Unified Communications Manager 8.5(1) 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} Cisco Unified Communications Manager 8.5(1)에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Unified Communications Manager 8.5(1) 20 페이지. 850 series and 870 series access routers cabling and setup
Cisco Unified Communications Manager 8.5(1)에 대해서도 마찬가지입니다: 데이터시트 (8 페이지)
페이지 인쇄
- 1. Table of Contents
- 2. Cisco One-Year Limited Hardware Warranty Terms
- 3. Locate the Product Serial Number
- 4. Before Installation
- 5. Connect the Antenna to the Wireless Router (Optional)
- 6. Connect the Power-Over-Ethernet Module to the Cisco 870 Series Router (Optional)
- 7. Typical Installations of the Cisco 850 Series and Cisco 870 Series Routers
- 7. Console Port
- 7. Power Adapter
- 8. Connect the Router
- 9. Install SDM and Configure the Router
- 10. Related Documentation
- 11. Obtaining Documentation and Submitting a Service Request
Chapter 1
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
Figure 1-2
Items Included with the Cisco 850 Series and Cisco 870 Series Routers
2
3
4
1
Yellow Ethernet cable
2
Lavender DSL cable (optional)
3
Light blue console cable
4
Router power adapter
Caution
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
78-16262-04
The following cables are not included with the router. You need to order them
separately.
Modem cable—For connecting the router console port to an asynchronous
•
modem for dial backup and remote management.
Orange ISDN S/T cable—For connecting devices to the ISDN S/T port.
•
Both LAN and WAN ports can use RJ-45 connectors. Use caution when
connecting cables to these connectors. To avoid damage to the router, do not
connect telephone-network voltage (TNV) circuits (such as ISDN or DSL
circuits) to safety extra-low voltage (SELV) circuits (such as LAN circuits).
5
6
7
8
5
Black power cord for adapter
6
Product documentation
7
Cisco SDM software CD
8
Swivel-mount dipole antenna (wireless router
models only)
Before Installation
1-5