Cab Technology PCU Series 운영자 매뉴얼 - 페이지 9
{카테고리_이름} Cab Technology PCU Series에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cab Technology PCU Series 20 페이지. Perforation cutter
페이지 인쇄Printer Configuration
3
Once the cutter is connected to the printer, the printer will automatically
recognize it on turn on.
The printer can be configured to suit the individual requirements of cut mode
in the „Setup" menu. When the cutter is installed, the „Cutter" menu will
appear.
i
Notice!
For detailed instructions for configuration Configuration Manual
of the printer.
For setting the cutter parameters select
-> Machine param.
Setup
Parameter
Cutter
> Cut
position
> Cutting
depth
i
Notice!
The values of the setup are basic settings for the actual combination
printer/cutter. After changing the cutter or printer a re-adjustment
may be necessary.
Changes required for processing different print jobs should be
implemented additional offsets available in the software.
The offset values from setup and software are added together for
execution.
Meaning
Configuration of the perforation cutter
Offset of the cut position relative to the printed
image
Setting of the perforation depth
-> Cutter
.
9
Default
0
0