Cab Technology PCU4/10 운영자 매뉴얼 - 페이지 8

{카테고리_이름} Cab Technology PCU4/10에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cab Technology PCU4/10 20 페이지. Perforation cutter

Mounting

Attention!

 Disconnect the printer from the electrical outlet before

mounting or removing the cutter.

1. Loosen the screw (2).

2. Remove the front cover (1).

Attention!

For cutter operation with A+ printer there has to be mounted a

tear-off plate or a dispense plate on the printer, to lead the material

through the blades of the cutter.

3. Insert the pins (3) of the cutter (7) into the holes (4) of the printer.

4. Press the cutter against the printer. That way the plug of the cutter will be

connected to the peripheral port (5) of the printer.

5. Secure the cutter (7) with the screw (6).