Cisco Wireless Express 526 빠른 시작 매뉴얼 - 페이지 8
{카테고리_이름} Cisco Wireless Express 526에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Wireless Express 526 44 페이지. Wireless express mobility controller
페이지 인쇄
Table 1
Startup Wizard Information
Wizard Setting
System Name
Administrative user name and password
Management Interface VLAN Identifier
Management Interface IP Address
Management Interface Netmask
Management Interface Default Router
Management Interface Port Number
Primary DHCP Server IP Address
Secondary DHCP server IP Address
LWAPP Transport Mode
RF Mobility Domain Name
8
Action
The name you want to assign to the controller.
You can enter up to 32 ASCII characters.
The administrative username and password to be
assigned to this controller. You can enter up to 24
ASCII characters for each.
The default administrative username and
password are both admin and admin.
The VLAN identifier of the management
interface (a valid VLAN identifier or 0 for an
untagged VLAN).
The VLAN identifier should be set to match the
switch interface configuration.
The management interface is the default interface
for in-band management of the controller and
connectivity to services such as AAA servers.
You can access the controller's GUI interface
using this address.
Enter the IP address of the management interface
netmask.
Enter the IP address of the default router.
Enter the port number of the access point
manager interface. The default is 1.
The management interface DHCP server IP
address. The default is 192.168.1.1.
The IP address of the a secondary DHCP server.
The default is 0.0.0.0.
The default is Layer 3.
The name of the mobility group/RF group to
which you want the controller to belong.
The default is default.