Cisco WRT54G2 Linksys 사용자 설명서 - 페이지 25

{카테고리_이름} Cisco WRT54G2 Linksys에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco WRT54G2 Linksys 44 페이지. Wireless-g
Cisco WRT54G2 Linksys에 대해서도 마찬가지입니다: 데이터시트 (2 페이지), 빠른 설치 매뉴얼 (44 페이지), 사용자 설명서 (8 페이지)

페이지 인쇄

Chapter 3

if the test was successful. To stop the test, click Stop. Click

Clear Log to clear the screen. Click Close to return to the

Diagnostics screen.

The Traceroute Test

Administration > Factory Defaults

The Administration > Factory Defaults screen allows you

to restore the Router's configuration to its factory default

settings.

Factory Defaults

Restore Factory Defaults

to the default values, select Yes, and then click Save

Settings. Any settings you have saved will be lost when

the default settings are restored.

Administration > Factory Defaults

Administration > Upgrade Firmware

The Administration > Upgrade Firmware screen allows

you to upgrade the Router's firmware. Do not upgrade

the firmware unless you are experiencing problems with

the Router or the new firmware has a feature you want

to use.

Wireless-G Broadband Router

To reset the Router's settings

Advanced Configuration

Administration > Upgrade Firmware

Before upgrading the firmware, download the Router's

firmware upgrade file from the Linksys website, www.

linksys.com. Then extract the file.

Upgrade Firmware

Please select a file to upgrade

the extracted firmware upgrade file. Then click Upgrade

and follow the on-screen instructions.

Administration > Config Management

This screen is used to back up or restore the Router's

configuration file.

Administration > Config Management

Backup Configuration

To back up the Router's configuration file, click Backup.

Then follow the on-screen instructions.

Restore Configuration

Please select a file to restore

the configuration file. Then click Restore.

Click Browse and select