Cisco XR 12816 재포장 매뉴얼 - 페이지 7

{카테고리_이름} Cisco XR 12816에 대한 재포장 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco XR 12816 26 페이지. Cisco systems router owner's manual
Cisco XR 12816에 대해서도 마찬가지입니다: 설치 매뉴얼 (41 페이지)

페이지 인쇄
Appendix A
Repackaging the Router
Removing the Router from the Rack
Note

Powering Down the Router

OL-17440-01
This section describes how to remove the router from the equipment rack.
A fully-equipped router can weigh as much as 415 lb (188 kg). Because of the
weight and height of the router, Cisco provides a rack-mounting system for the
router that enables a team of two installers to extract a fully-loaded router from a
rack without removing any of the components from the router chassis. For
information on the router rack-mounting system, refer to
with an optional two-level AC-input power shelf can weigh as much as
440 pounds (200 kg). The router ships on a scissor-jack platform that enables two
people to install a fully loaded router into a rack without removing any of the
components from the chassis." section on page
As an option, you can elect to remove some of the components from the chassis
to reduce the top-end weight of the chassis and lower the center of gravity, making
the chassis more stable as you move it. The procedures for removing components
are described in the
"Unpacking and Positioning the Router" section on page
Procedures in the following sections describe the steps for removing the chassis
from the equipment rack:
•
Removing the Front Covers, page A-8
•
Disconnecting RP Cables, page A-8
•
Disconnecting Alarm Card Cables, page A-8
•
•
•
•
•
Power down the router as instructed in the
5-2.
Cisco XR 12416 and Cisco XR 12816 Router Chassis Installation Guide
Repackaging the Routers
"A fully equipped router
3-2.
"Powering Down the Router" section
3-3.
A-7