Cisco 1130AG - Aironet - Wireless Access Point 빠른 시작 매뉴얼 - 페이지 18
{카테고리_이름} Cisco 1130AG - Aironet - Wireless Access Point에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1130AG - Aironet - Wireless Access Point 49 페이지. Ieee 802.11a/b/g access point
Cisco 1130AG - Aironet - Wireless Access Point에 대해서도 마찬가지입니다: 데이터시트 (13 페이지)
페이지 인쇄
Note
If you are connected to the access point using a Telnet session you
lose your connection to the access point when you assign a new IP
address to the BVI. If you need to continue configuring the access
point using Telnet, use the new IP address to open another Telnet
session to the access point.
Using a Telnet Session to Access the CLI
Follow these steps to browse to access the CLI using a Telnet session. These
steps are for a PC running Microsoft Windows with a Telnet terminal
application. Check your PC operating instructions for detailed instructions.
1. Select Start > Programs > Accessories > Telnet.
If Telnet is not listed in your Accessories menu, select Start > Run, type
Telnet in the entry field, and press Enter.
2. When the Telnet window appears, click Connect and select Remote
System.
In the Host Name field, type the access point's IP address and click Connect.
18
78-15955-02