Epson V11H180020-N - PowerLite Home 20 사용자 설명서 - 페이지 34
{카테고리_이름} Epson V11H180020-N - PowerLite Home 20에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson V11H180020-N - PowerLite Home 20 50 페이지. Epson esc/vp21 modem: users guide
Epson V11H180020-N - PowerLite Home 20에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (7 페이지), 사용자 설명서 (1 페이지)
Solving Picture Problems
You see a screen with the message
Make sure your video equipment is turned on.
Make sure your cable(s) are connected correctly, as described in the Quick Setup sheet.
Use the
Source
source. Allow a few seconds for the projector to sync up.
Press the
shown for your connected equipment is listed as a compatible format on page 41.
No picture appears on the screen.
Make sure the projector is turned on (the P power light is green and not flashing).
Make sure the lens cover is off.
Press the
turned off temporarily.
If you're projecting from a laptop, you may need to set it to display on an external
monitor, as described below.
If you're using a PC laptop:
Press the function key that lets you display on an external monitor. It's often labeled with
an icon such as
the
key while pressing it, or restart your laptop. Check your laptop's manual or online
Fn
help.
On most systems, the
projector, or display on both at the same time. Allow a few seconds for the projector to
sync up after pressing it.
Depending on your computer's video card, you might need to use the Display utility in
the Control Panel to make sure that both the LCD screen and external monitor port are
enabled. See your computer's documentation for details.
34
Problem Solving
button(s) on the projector or remote control to select the correct input
button and select
Menu
button on the remote control to make sure the picture hasn't been
A/V Mute
, but it may also be labeled
key lets you toggle between the LCD screen and the
displayed.
No Signal
. Make sure the resolution or video signal format
Info
CRT/LCD
. You may have to hold down