Cisco 500 Series 사용자 설명서 - 페이지 5

{카테고리_이름} Cisco 500 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 500 Series 6 페이지. Stackable managed switches
Cisco 500 Series에 대해서도 마찬가지입니다: 안전 정보 매뉴얼 (42 페이지), 매뉴얼 (4 페이지), 빠른 시작 Quide (13 페이지), 빠른 시작 매뉴얼 (21 페이지), 데이터시트 (5 페이지), 사용자 설명서 (4 페이지), 사용자 설명서 (46 페이지), 매뉴얼 (40 페이지), 관리 매뉴얼 (48 페이지), 매뉴얼 (24 페이지), 문제 해결 및 유지 관리 (15 페이지), 빠른 참조 매뉴얼 (7 페이지), 빠른 시작 매뉴얼 (25 페이지)

페이지 인쇄
Cisco 500 Series 사용자 설명서

Feature Access Codes

When using the codes, you will be guided through the process by an
automated service. For example,
if you want to access your voicemail, press the envelope key (next to number
3), you will then be asked to enter your pass code followed by the # key. Once
entered, you will have a choice to listen to new messages, reset your greeting
etc. Set up code for Voicemail is 1379, this will need changing.
The internal transfer/extension number is the last 3 digits of your DDI as
displayed on the handset.
Description
Call transfer (Xfer)
All codes should be finished by pressing the dial key or # key to activate the command.
Call forward always on
(to another number):
Call forward always off
(to another number):
Call forward always on (to voicemail): *21
Call forward always off (to voicemail):
Call Park:
Call Park Retrieve:
Call Pickup:
Call Return:
Do Not Disturb on :
Do Not Disturb off :
Voicemail:
Cisco "500" series handset
Code
Additional instructions (attended
announcement)
Soft key During call press Xfer key followed by number
then when ring tone heard or call answered,
Xfer key once more.
*72
Followed by forward number and # when
prompted
*73
Announcement confirms deactivated
Announcements confirms applied
#21
Announcement confirms deactivated
*68
Press hold key, followed by *68 then follow
instructions
*88
Dial code then follow instructions
*98
When other phone is ringing, press soft key or
dial code
*69
Dial code
*78
Dial code or use soft key
*79
Dial code or use soft key
*62
Dial code or use soft key
5