Cisco 500 Series 매뉴얼 - 페이지 8

{카테고리_이름} Cisco 500 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 500 Series 24 페이지. Stackable managed switches
Cisco 500 Series에 대해서도 마찬가지입니다: 안전 정보 매뉴얼 (42 페이지), 매뉴얼 (4 페이지), 빠른 시작 Quide (13 페이지), 빠른 시작 매뉴얼 (21 페이지), 데이터시트 (5 페이지), 사용자 설명서 (4 페이지), 사용자 설명서 (6 페이지), 사용자 설명서 (46 페이지), 매뉴얼 (40 페이지), 관리 매뉴얼 (48 페이지), 문제 해결 및 유지 관리 (15 페이지), 빠른 참조 매뉴얼 (7 페이지), 빠른 시작 매뉴얼 (25 페이지)

Standard Base for Cisco Headset 561 and 562

The Cisco Headset 561 and 562 come with a standard base to charge your headset. The base's LED display

shows the current battery level, and your call state. In addition to the call control buttons on the headset, you

can also answer and end calls when you lift or set down your headset on the base.

The connection between the base and the headset is made with Digital Enhanced Cordless Telecommunications

(DECT).

Figure 8: LED Display on the Standard Base for Cisco 561 and 562 Headset

The following table describes the standard base for Cisco 561 and 562 Headset.

Table 3: Standard Base for Cisco 561 and 562 Headset

Number

Cisco Headset 561 and 562 with Multibase

The multibase can connect up to three call sources through Bluetooth, the USB connector, or the Y-cable.

The multibase can save up to four Bluetooth devices. You can switch between call sources using the buttons

on the multibase. You use the call control buttons on the headset to answer and end calls. When your headset

is in the base, you automatically answer the call when you remove the headset from the base. You can return

the headset to the base to end the call.

The multibase comes with the following connector cables:

• USB to USB Cable: for Cisco IP Phones with USB connectivity

Accessories

Name

Battery Status LED

Call Status LED

Description

Indicates the headset battery charge.

Alerts you to the call state:

• Incoming call—Blinking green.

• Active call—Steady green.

• Muted call—Steady red.

Accessories