Cisco 500 Series 문제 해결 및 유지 관리 - 페이지 5

{카테고리_이름} Cisco 500 Series에 대한 문제 해결 및 유지 관리을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 500 Series 15 페이지. Stackable managed switches
Cisco 500 Series에 대해서도 마찬가지입니다: 안전 정보 매뉴얼 (42 페이지), 매뉴얼 (4 페이지), 빠른 시작 Quide (13 페이지), 빠른 시작 매뉴얼 (21 페이지), 데이터시트 (5 페이지), 사용자 설명서 (4 페이지), 사용자 설명서 (6 페이지), 사용자 설명서 (46 페이지), 매뉴얼 (40 페이지), 관리 매뉴얼 (48 페이지), 매뉴얼 (24 페이지), 빠른 참조 매뉴얼 (7 페이지), 빠른 시작 매뉴얼 (25 페이지)

페이지 인쇄
Cisco 500 Series 문제 해결 및 유지 관리
Troubleshooting and Maintenance
Other People Can't Hear You on Your Cisco Headset 560 Series
Problem
You cannot be heard when using your Cisco Headset 560 Series.
Solutions
Related Topics
Your Headset Does Not Alert You to Incoming Calls on a Cisco IP Phone
Problem
Your Cisco Headset 500 Series does not play a tone when you have an incoming call.
Make sure that the microphone boom has been lowered. For optimal sound, the headset microphone
should be no further than 1 in (2.5 cm) from your mouth.
Make sure that your headset is properly plugged into your preferred call device.
Check that your desired call device detects your headset.
Check to make sure your microphone is not muted. Press Mute on your wireless headset to mute and
unmute your microphone. When you are muted on a call, the call indicator LED on your base shows solid
red.
Make sure that the microphone boom has been lowered. For optimal sound, the headset microphone
should be no further than 1 in (2.5 cm) from your mouth.
Make sure that your base is properly plugged into your preferred call device. Ensure that the connection
to and from the base is secure.
Make sure that you don't take your headset too far from the base.
Make sure that your desired call device detects your headset.
Move your base away from potential sources of radio interference such as DECT, Wi-Fi, and Bluetooth
devices.
Cisco Headset 560 Series
Other People Can't Hear You on Your Cisco Headset 560 Series
Troubleshooting and Maintenance
5