Epson V11H283220 - PowerLite S6+ SVGA LCD Projector 빠른 설정 매뉴얼 - 페이지 4
{카테고리_이름} Epson V11H283220 - PowerLite S6+ SVGA LCD Projector에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson V11H283220 - PowerLite S6+ SVGA LCD Projector 7 페이지. Supplemental / late breaking information
Epson V11H283220 - PowerLite S6+ SVGA LCD Projector에 대해서도 마찬가지입니다: 사양 (2 페이지), 적합성 선언 (4 페이지), 사용자 설명서 (1 페이지), 업데이트 매뉴얼 (4 페이지)
페이지 인쇄
Connecting with an HDMI cable (PowerLite W6 Series only)
For the best image and sound quality, connect your video equipment to
the HDMI port, if possible.
1
Connect an HDMI cable (not included) to the HDMI port on your
video player and the HDMI port on the projector.
2
Start your video or presentation. Use the Source Search button
on the projector or the Search or Source Search button on the
remote control to select the HDMI source, if necessary.
Connecting with a component video cable
If your video equipment has component video connectors (three
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can use a
component-to-VGA cable (not included) to connect the projector.
Once you've connected the cable(s), start your video or presentation.
Use the Source Search button on the projector or the Search or
Source Search button on the remote control to select the video source,
if necessary.
You can connect an optional audio cable if you want to play sound
through the projector. See the User's Guide on your CD-ROM for
instructions.
6
Adjust the image
1
T o raise the image, press the foot release lever and lift the front of
the projector. Release the lever to lock the foot in the position you
want.
2
R otate the focus ring to sharpen the image. To reduce or enlarge
the image, rotate the zoom ring (PowerLite 78/W6 Series only) or
press the Wide (enlarge) or Tele (reduce) button on the projector's
control panel (PowerLite S6 Series only).
(PowerLite 78/W6 Series only)
3
I f your image looks like
is facing the screen squarely. Then, if necessary, press the
buttons on the projector's control panel until the image looks
correct.
Zoom ring
or
, first make sure the projector
Focus ring
and