Cisco AIR-AP1042N-T-K9 시작하기 매뉴얼 - 페이지 3

{카테고리_이름} Cisco AIR-AP1042N-T-K9에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco AIR-AP1042N-T-K9 35 페이지.

Warning

Do not operate your wireless network device near unshielded blasting caps or in an

explosive environment unless the device has been modified to be especially qualified for

such use. Statement 245B

Warning

In order to comply with FCC radio frequency (RF) exposure limits, antennas should be

located at a minimum of 7.9 inches (20 cm) or more from the body of all persons.

Statement 332

Do not use the supplied plastic wall anchors to mount the access point on a ceiling

Caution

because they will not support the weight of the access point. The fasteners used must be

capable of maintaining a minimum pullout force of 20 lbs (9 kg) and must use all 4

indented holes on the low-profile mounting bracket.

This product and all interconnected equipment must be installed indoors within the same

Caution

building, including the associated LAN connections as defined by Environment A of the

IEEE 802.af Standard.

The access point is suitable for use in environmental air space in accordance with section

Note

300.22.C of the National Electrical Code and sections 2-128, 12-010(3), and 12-100 of the

Canadian Electrical Code, Part 1, C22.1. You should not install the power supply or power

injector in air handling spaces.

Use only with listed ITE equipment.

Note