Cisco AIR-AP1142N-E-K9 시작하기 매뉴얼 - 페이지 8

{카테고리_이름} Cisco AIR-AP1142N-E-K9에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco AIR-AP1142N-E-K9 37 페이지. Autonomous access point

Command

interface bvi1

Step 2

ip address ip_address net_mask

Step 3

Assigning an IP Address Using the CLI

Follow these steps to access the CLI using a Telnet session. These steps are for a PC running Microsoft

Windows with a Telnet terminal application. Check your PC operating instructions for detailed

instructions.

Select Start > Programs > Accessories > Telnet.

Step 1

If Telnet is not listed in your Accessories menu, select Start > Run, type Telnet in the entry

field, and press Enter.

Step 2

When the Telnet window appears, click Connect and select Remote System.

In the Host Name field, type the access point IP address and click Connect.

Step 3

If you are connected to the access point using a Telnet session, you lose your connection to

Note

the access point when you assign a new IP address to the BVI. If you need to continue

configuring the access point using Telnet, use the new IP address to open another Telnet

session to the access point.

Purpose

Enters interface configuration mode for the

BVI.

Assigns an IP address and subnet mask

address to the BVI.