Cisco AIR-AP1210 - Aironet 1200 - Wireless Access Point External 사용자 설명서 - 페이지 8
{카테고리_이름} Cisco AIR-AP1210 - Aironet 1200 - Wireless Access Point External에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco AIR-AP1210 - Aironet 1200 - Wireless Access Point External 36 페이지. Aironet 1100/1200 series
Cisco AIR-AP1210 - Aironet 1200 - Wireless Access Point External에 대해서도 마찬가지입니다: 주문 매뉴얼 (6 페이지)
페이지 인쇄
Note
If the radio card does not spring up, slightly loosen the support
bracket screws.
4. Remove the 2.4-GHz radio card from the mini-PCI connector by
performing the following operations:
a. Grasp the radio card only on the edges, being careful not to touch
components on the board or the gold connector pins.
b. Remove the 2.4-GHz card from the mini-PCI connector.
5. Place the radio card and antenna card on the ESD-protected work
surface.
Caution
You can damage the connectors if you use long-nose pliers or
similar tools during the removal process. To avoid damaging the
antenna wire assemblies, remove them by hand.
6. Use your fingers to carefully remove the antenna wire connectors from
the 2.4-GHz radio card. Do not remove the antenna wire connectors from
the antenna board.
8