Cisco AIR-AP2802I-B-K9 시작하기 매뉴얼 - 페이지 25

{카테고리_이름} Cisco AIR-AP2802I-B-K9에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco AIR-AP2802I-B-K9 50 페이지.

• Reset the AP to the default factory-shipped configuration.

• Clear the AP internal storage, including all configuration files.

To use the mode button, press, and keep pressed, the mode button on the access point during the

AP boot cycle. Wait until the AP status LED changes to Amber. During this, the AP console shows a

seconds counter, counting the number of seconds the mode button is pressed. Then:

• To reset the AP to the default factory-shipped configuration, keep the mode button pressed for less

than 20 seconds. The AP configuration files are cleared.

This resets all configuration settings to factory defaults, including passwords, WEP keys, the IP

address, and the SSID.

• To clear the AP internal storage, including all configuration files and the regulatory domain

configuration, keep the mode button pressed for more than 20 seconds, but less than 60 seconds.

The AP status LED changes from Amber to Red, and all the files in the AP storage directory are

cleared.

If you keep the mode button pressed for more than 60 seconds, the mode button is assumed faulty and

no changes are made.