Cisco AIR-CAP1552WU-x-K9 설치 매뉴얼 - 페이지 20
{카테고리_이름} Cisco AIR-CAP1552WU-x-K9에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco AIR-CAP1552WU-x-K9 24 페이지. Cisco aironet 1550 series for hazardous locations
페이지 인쇄
:: Seite 20 von 24 :: Datenblatt zum Produkt Cisco Cisco Aironet for hazardous locations - mit DC# 790021 ::
Hardware Features
Honeywell Backbone Router Activation Process
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Cisco Aironet 1550 Series for Hazardous Locations Installation Guide
1-20
Fragen zu dem Produkt? Kein Problem - wir helfen Ihnen per eMail ([email protected]) gerne weiter!
Den aktuellen Preis und Lagerstand finden Sie online auf http://www.diskontcomputer.com/detail.php?item=790021
Along with robust and reliable Cisco Outdoor WI-FI wireless mesh, it also creates parallel Industrial
Wireless Automation Network to support field sensors and actuators running on ISA100.11a protocol.
The backbone router manages and aggregates Industrial Wireless Data and passes it over to the Cisco
Wireless Mesh backbone. Cisco Wireless Mesh carries Industrial Wireless Traffic with highest priority
(or QoS) with minimal latency and highest reliability and routes it to the Wireless Device Manager,
which is part of the Honeywell One Wireless Infrastructure Solution.
Refer to Cisco Documentation for installation, configuration, best practices and troubleshooting guides
on www.cisco.com.
Refer to Honeywell One Wireless Plant Solution documentation on
details.
The following steps describe conceptual process and flow only. Refer to Honeywell's detailed
documentation for configuration information.
This process assumes that you have Honeywell One wireless setup installed. It includes, but is not
limited to, the Honeywell WDM and Honeywell or other compatible ISA100 sensors. The Honeywell
WDM should be configured according to Honeywell's documentation.
Once you have the WDM and other infrastructure configured according to Honeywell documentation,
activate the provisioning device provided by Honeywell in the WDM by connecting to the WDM USB
port according Honeywell documentation.
Create keys on the WDM and download/transfer them on a handheld device.
Launch provisioning application on handheld device. Point this handheld device towards the Infrared
Sensor on the 15552SA/1552SD and press activate button on the Honeywell Provisioning application.
Handheld device will transfer / communicate keys to Honeywell BBR and get status if activated
successfully.
Same process needs to be applied for sensors to be activated and included in Industrial Wireless Sensor
Network.
All these devices can be Configured and monitored in Honeywell WDM once they are part of wireless
network.
DC diskontcomputer.com GmbH
Traunuferstrasse 110
4052 Ansfelden, Austria
Chapter 1
Overview
www.honeywell.com
for further