ARGEAD MINOR-PLUS 3V 사용 설명서 - 페이지 5

{카테고리_이름} ARGEAD MINOR-PLUS 3V에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ARGEAD MINOR-PLUS 3V 6 페이지. Shearing plant

EXPLODED VIEW: X-125-T FLEXIBLE DRIVE

-6-

Connect the motor to the grid (220v A/C)

TIONS

Thread the arm onto the motor without connecting the scissors (left-hand

thread).

Start the motor by pushing the green switch and then pull on the cord.

Connect the scissors, pushing towards the inside of the arm.

Before starting to shear, carefully read the Instruction Manual for the Scis-

sors.

Stop the motor by pulling on the cord again.

To remove the scissors from the arm: push towards the inside, turn half a

circle anticlockwise and pull outwards.

After completing the shearing, disconnect the motor from the grid.

This machine has three speeds (2,800, 3,200 and 3,400 r.p.m.); the most

suitable speed is dependent on the conditions of the livestock and the ability

of the shearer.

Change speed by removing the protective guard and adjusting the position

of the belt (no tools needed), checking the belt is perfectly aligned between

the two pulleys.

Put the protective guard in place.

This action must be undertaken with the motor disconnected from the grid.

START UP

READ THE SAFETY INSTRUC-

. (

-3-