CABASSE XI SYSTEM - 소유자 매뉴얼 - 페이지 9

{카테고리_이름} CABASSE XI SYSTEM -에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CABASSE XI SYSTEM - 16 페이지.

페이지 인쇄

e n g l i s h

Before making

It is imperative

any connection

before any

turns off your

connection

amplifier and

to respect the

unplugs it from

setting in phase

the outlet.

by connecting

Not doing so may

the terminals +/red

result in damage

of the amplifier to

to your system.

the terminal +/red

of the speakers.

Proceed then

in the same way for

terminals -/black.

Connections

2.1 Configuration/Stereo

2 Xi speakers + 1 Xi subwoofer

(delivered with a MAX module and 2 CINCH cables)

Connect each output of the amplifier directly to the matching

Xi speaker: "FRONT LEFT" and "FRONT RIGHT".

Use the MAX module and one of the 2 CINCH cables for the

connection of the subwoofer. Low frequencies coming from the

2 channels of your amplifier are taken directly from the ampli-

fier with the MAX module and directed with one of the CINCH

cable to the MAX IN input of the subwoofer. For the MAX

module, cables are standardized; they can be connected to

any speaker's outputs of the amplifier. It is absolutely necessary

to respect the polarity (+/red, - /black) while connecting 2 of

the 5 pairs of cables of the MAX in parallel with the speaker's

cables connecting the amplifier to the Xi speakers.

To avoid any electrical

shock on the 3 left pairs

of cable of the MAX

insulates them

from each other.

The use of the

MAX Cabasse

module is essential

to the correct

operation of

Xi SYSTEM

;

therefore,

it is necessary

to respect

the following

connection

instructions.

Configuration 5.1

5 Xi speakers + 1 Xi subwoofer

(delivered with a MAX module and 2 CINCH cables)

Connect each output of the audio video amplifier directly to

the matching Xi speaker: "FRONT LEFT", "FRONT RIGHT",

"CENTRE", "SURROUND LEFT" and "SURROUND RIGHT".

Use the MAX module and the 2 CINCH cables for the con-

nection of the subwoofer. Low frequencies coming from the 5

channels of your audio video amplifier are taken directly from

the audio video amplifier with the MAX module and directed

with one of the CINCH cable to the MAX IN input of the sub-

woofer. For the MAX module, cables are standardized; they

can be connected to any speaker's outputs of the amplifier. It

is absolutely necessary to respect the polarity (+/red, - /black)

while connecting the 5 pairs of cables of the MAX in parallel

with the speaker's cables connecting the audio video amplifi-

er to the Xi speakers.

Then connect the input LFE IN of the subwoofer to the output

SUBWOOFER/LFE of the audio video amplifier using the sec-

ond CINCH cable.

Evolution from a stereo configuration

to a 5.1 configuration

2 Cabasse speakers + 3 Xi speakers + 1 Xi subwoofer

(delivered with a MAX module and 2 CINCH cables)

Connect each output of the audio video amplifier directly to

the matching speaker: "FRONT LEFT" and "FRONT RIGHT"

to your Cabasse speakers, "CENTRE", "SURROUND LEFT"

and "SURROUND RIGHT" to the Xi speakers.

Use the MAX module and the 2 CINCH cables for the con-

nection of the subwoofer. Low frequencies coming from the 3

channels "CENTRE", "SURROUND LEFT" and "SURROUND

RIGHT" of your audio video amplifier are taken directly from

the audio video amplifier with the MAX module and directed

with one of the CINCH cable to the MAX IN input of the sub-

woofer. For the MAX module, cables are standardized; they

can be connected to any speaker's outputs of the audio video

amplifier. It is absolutely necessary to respect the polarity

(+/red, - /black) while connecting 3 of the 5 pairs of cables of

the MAX in parallel with the speaker's cables connecting the

audio video amplifier to the Xi speakers.

Then connect the input LFE IN of the subwoofer to the output

SUBWOOFER/LFE of the audio video amplifier using the sec-

ond CINCH cable.

To avoid any

electrical shock

on the 2 left pairs

of cables of the MAX

insulates them

from each other.