DigitaLinx DL-FHD2 소유자 매뉴얼 - 페이지 6

{카테고리_이름} DigitaLinx DL-FHD2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DigitaLinx DL-FHD2 18 페이지.

DL-FHD2 Owners Manual

Transmitter

1� OPTICAL OUT (A B)

• LC-LC Fiber Optic output for duplex LC fiber to DL-FHD2 receiver connection

2� HDMI IN

• HDMI input port for connection to video sources

3� AUDIO OUT (ARC)

• Digital audio output port (TOSLINK) for routing multi-channel audio from DL-FHD2 receiver to

audio amplifier or mixer

4� IR IN / IR OUT

• 3.5mm IR input port for connection to IR receiver or IR system

• 3.5mm IR output port for connection to IR emitter

5� RS232

• 3 pin Phoenix connector port for connecting and passing RS232 control to receiver / display

location

6� DC 12V

• Locking power port, connect DC12V power adapter to transmitter (both TX and RX must be

powered individually to activate circuit)

7� FRONT PANEL DIAGNOSTIC LEDs;

• POWER - When solid, the DL-FHD2 extender is receiving power from the DC power supply

• LINK - When solid green, the transmitter and receiver fiber optic links are successful

• STATUS - When solid green, signal data is transmitting successfully between the transmitter and

receiver

8� AUDIO MODE SELECTION SWITCH

• ARC - Switches audio mode to ARC

• AUDIO - Switches audio mode to audio pass through (from receiver)

9� FW

• Micro USB B port for firmware updates

Front and Rear View