Argent BATH FILLER 관리 및 설치 매뉴얼 - 페이지 2

{카테고리_이름} Argent BATH FILLER에 대한 관리 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Argent BATH FILLER 2 페이지. Bath filler

ARGENT BATH FILLERS
BATH FILLER FIT OFF
1. REMOVE THE PLASTIC BLANKING PLATE
2. Flush the lines to ensure there is no debris in the pipes
3. Install the Bath filler into the rough in body, ensuring that the hot and cold orientation is correct. Hot water
line on the bath filler has a red O- ring on the bottom.
4. Tighten using the four grub screws that held the plastic blanking plate in place.
5. Wet Test the bath filler including the functions of the spout and the handpiece.
6. Place cover cap in position
STEP1
NOTES TO THE INSTALLER/ END USER.
1. This bath filler uses a progressive diverter cartridge.
2. Move the lever clockwise to activate the bath filler spout, the further forward you rotate the lever the fast
and warmer the water flows.
3. Move the lever counter clockwise to activate the shower, the further backwards you rotate the lever the
fast and warmer the water flows.
4. TWISTING OR STRECHING THE SHOWER HOSE MAY RESULT IN FAILURE, AND WILL VOID THE WARRANTY.
CLEANING AND MAINTENANCE
1. THE SPECIAL CHROME FINISH ONLY REQUIRES
CLEANING WITH MILD HOUSEHOLD DETERGENT
AND DRY WITH A CLEAN COTTON CLOTH TO
RETAIN ITS LUSTROUS SHINE.
2. AVOID CLEANING WITH ABRASIVE MATERIALS OR
CLEANERS
Technical Hotline
1800 356 717
STEPS 3&4
PRODUCT CODES
FM2963801
FM3493801
FM3683801
FM3693801
Customer Central
1300 364 748
Argent Bath Filler
Care & Installation Guide
STEPS 6
Rough-in Body
FLOW Bath Filler
LOFT Bath Filler
KUBIC Bath Filler
www.argentaust.com.au