DigitaLinx DL-HD50C 빠른 시작 매뉴얼 - 페이지 2
{카테고리_이름} DigitaLinx DL-HD50C에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DigitaLinx DL-HD50C 4 페이지.
페이지 인쇄
The DigitaLinx DL-HD50C is an HDMI Extender over Single Cat6 with IR up to a distance
of 164ft/50m. The DL-HD50C features EDID management, which allows and encourages
source and display "handshake" for seamless integration. Deep color video, 1080p High
Definition resolution, DTS-HD or Dolby TrueHD audio are supported with this extender.
In addition, The DL-HD50C is sold as a set with a transmitting unit and receiving unit.
The transmitting unit is used to capture the HDMI input with IR and carries the signals
via one cost effective Cat6 F/UTP cable. The receiving unit is responsible for equalizing
the transmitted HDMI signal and reconstructing IR control signals. The extender offers
the most convenient solution for HDMI extension over a single Cat6 with long distance
capability, and is the perfect solution for any application.
Adjust the EQ switch signal level from MIN to MAX until desired video quality is displayed.
MAX stands for the strongest HDMI signal level for the longest possible transmission
length while MIN stands for the weakest HDMI signal level for short transmission length.
Position
Equalizer Distance Adjust
Recommended EQ Setting
0
1
2
3
4
5
6
7
Cable Length
Under 15 meters (49.5ft)
15-30m (49.5 ft- 99ft)
30-40m (99ft- 132ft)
40-50m(132ft– 164ft)