DigitaLinx DL-HD70LS 소유자 매뉴얼 - 페이지 8
{카테고리_이름} DigitaLinx DL-HD70LS에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DigitaLinx DL-HD70LS 15 페이지.
DigitaLinx DL-HD70LS에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (8 페이지)
페이지 인쇄
DL-HD70LS Owners Manual
Quick Start
1.
Connect video source to transmitter HDMI IN
2.
Connect display device to receiver HDMI OUT
3.
Connect transmitter and receiver together with a shielded Category 6 cable
4.
Connect IR control (optional)
5.
Apply power to either transmitter OR receiver to power entire circuit
Connecting a Video Source
HDMI Input (Transmitter)
Connect an HDMI source device to the HDMI input on the DL-HD70LS transmitter labeled HDMI IN using an
HDMI cable that is less than or equal to 5 meters in total length. For HDMI source devices that are further away,
an active HDMI cable may be required to complete the connection.
Connecting a Display
HDMI Output (Receiver)
Connect the display to the HDMI output on the DL-HD70LS receiver labeled HDMI OUT using an HDMI cable that
is less than or equal to 5 meters in length. It is recommended to keep the DL-HD70LS receiver near the display
input as it is not recommended that an active HDMI cable be used on the HDMI output on the
HD70LS receiver.
8
Installation Instructions
DL-