DigitaLinx DL-HDE100-H2 소유자 매뉴얼 - 페이지 7
{카테고리_이름} DigitaLinx DL-HDE100-H2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DigitaLinx DL-HDE100-H2 15 페이지.
페이지 인쇄
Quick Start
1.
Connect video source to transmitter HDMI IN
2.
Connect display technology to receiver HDMI OUT
3.
Connect transmitter and receiver together with a shielded Category 6 cable
4.
Connect control (optional)
5.
Connect LAN pass through (optional)
6.
Apply power to either transmitter OR receiver to power entire circuit
Connecting a Video Source
HDMI Input (Transmitter)
Connect an HDMI source device to the HDMI input on the DL-HDE100-H2 transmitter labeled HDMI IN using an
HDMI cable that is less than or equal to 5 meters in total length. For HDMI source devices that are further away,
an active HDMI cable may be required to complete the connection.
Connecting a Display
HDMI Output (Receiver)
Connect the display to the HDMI output on the DL-HDE100-H2 receiver labeled HDMI OUT using an HDMI
cable that is less than or equal to 5 meters in length. It is recommended to keep the DL-HDE100-H2receiver
near the display input as it is not recommended that an active HDMI cable be used on the HDMI output on the
DL-HDE100-H2 receiver.
Installation Instructions
DL-HDE100-H2 Owners Manual
7