DigitaLinx DL-HDFO 사용자 설명서 - 페이지 5

{카테고리_이름} DigitaLinx DL-HDFO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DigitaLinx DL-HDFO 13 페이지. Fiber optic extender

Product Description and General Specifications

This Digitalinx™ Fiber Optic Extender is an externally powered digital HDMI

and DVI extender system. The unit uses a supplied 12 VDC power source.

Only one unit, either the Transmitter or the Receiver, requires the power

supply. The device is compliant with DVI 1.0 and HDMI 1.2a signals. The

device is fully compliant with HDCP protocol. This device is classified as

Standard Speed for HDMI 1.3 applications.

This Digitalinx™ Fiber Optic Extender is ideal for long distance HDMI and

DVI applications where a small form factor cable is required. The unit will

extend the signal to 100 meters (328 feet) and offers maximum bandwidth

and flawless transmission of digital multimedia. The unit uses 4 Fiber Optic

Multimode LC channels to transmit R, G, B, and Clock with a copper Category

5/5e cable for DDC and power distribution. This device can also be used to

achieve plenum cabling possibilities for HDMI and DVI via the use of plenum

rated Fiber Cable and Plenum rated Category 5/5e cable.

The system can easily accommodate DVI only inputs and outputs by using

Liberty's high quality HDMI to DVI interconnects. The DVI connector is routed

to the sources and display unit while the HDMI connector plugs into the

Digitalinx™ Fiber Optic Extender. The digital audio signal is not transmitted

when using DVI connectors.

ITEM

Model Name

Input

Output

Maximum Resolution

HDCP Compatible

Power Consumption

Dimensions: (Height x Width x Depth)

Weight

DESCRIPTION

DL-HDFO

HDMI type A Receptacle

UXGA (1600x1200)@75Hz, HDTV 1080p60

Yes

12VDC, 3.0A

TX/RX 19x38x72mm

~0.46 Kg each unit

Product Description and General Specifications

1-4