Cisco Aironet 1600 Series 시작하기 매뉴얼 - 페이지 16
{카테고리_이름} Cisco Aironet 1600 Series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1600 Series 39 페이지. Aironet 1600 series access point
Cisco Aironet 1600 Series에 대해서도 마찬가지입니다: 사양 시트 (16 페이지)
10
Troubleshooting
If you experience difficulty getting your access point installed and running, look for a solution to your
problem in this guide or in additional access point documentation. These, and other documents, are
available on Cisco.com.
Guidelines for Using Cisco Aironet Lightweight Access Points
Keep these guidelines in mind when you use 1600 series lightweight access points:
• The access point can only communicate with Cisco wireless LAN controllers, such as 2500 series,
5500 series, and WiSM controllers.
• The access point does not support Wireless Domain Services (WDS) and cannot communicate with
WDS devices. However, the controller provides functionality equivalent to WDS when the access
point joins it.
• CAPWAP does not support Layer 2. The access point must get an IP address and discover the
controller using Layer 3, DHCP, DNS, or IP subnet broadcast.
• The access point console port is enabled for monitoring and debug purposes. All configuration
commands are disabled when the access point is connected to a controller.
Using DHCP Option 43
You can use DHCP Option 43 to provide a list of controller IP addresses to the access points, enabling
them to find and join a controller. For configuration information, see the following document:
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080871
4fe.shtml
The Vendor Class Identifier (VCI) string for the 1600 series access point is Cisco AP c1600.
Note
Checking the Access Point LED
The location of the access point status LED is shown in
Regarding LED status colors, it is expected that there will be small variations in color intensity
Note
and hue from unit to unit. This is within the normal range of the LED manufacturer's
specifications and is not a defect.
16
Figure
5.