Cisco aironet 1810 series 사용자 설명서 - 페이지 20
{카테고리_이름} Cisco aironet 1810 series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco aironet 1810 series 30 페이지. Officeextend access point
페이지 인쇄Configuration Page
System Tab
The Configuration System (see
information.
The Login section allows the user to change the username and password for the access point.
You can leave the username and password fields, along with the router's user name and password fields
Note
blank, to disable access control.
The Radio section allows the user to configure radio interface parameters. You can configure the
parameters for both the 2.4 GHz and the 5 GHz radios. To set these parameters, first click the radio you
want to configure from under the System tab.
You can set the following parameters for each radio:
•
•
•
•
•
Figure 2-4
Configuration–System Tab
Cisco Aironet 1810 Series OfficeExtend Access Point User Guide
2-6
Status—Enable/disable the selected radio interface (i.e. 2.4 GHz or 5 GHz).
802.11ac mode—Enable/disable the 802.11ac mode. This parameter is present only for the 5 GHz
radio.
802.11n mode—Enable/disable the 802.11n mode.
Bandwidth—Select the channel bandwidth. You can choose 20MHz, 40MHz, or 80MHz.
Channel Selection—Select a particular channel to operate in. For automatic selection, choose Auto.
Figure
2-4) tab displays and allows the user to configure general system
Chapter 2
Understanding the Access Point GUI