DigitaLinx DL-S41-H2 소유자 매뉴얼 - 페이지 12
{카테고리_이름} DigitaLinx DL-S41-H2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DigitaLinx DL-S41-H2 18 페이지.
DigitaLinx DL-S41-H2에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (8 페이지), 빠른 설치 매뉴얼 (8 페이지)
페이지 인쇄DL-S41-H2 Owners Manual
RS232 Settings: 9600 baud, 8 Data bits, 1 Stop bit, Parity = None
The commands are case sensitive. All commands below are in ASCII and all strings and responses end
in a carriage return (hex 0D) and a line feed (hex 0A).
<CR> = Carriage return (Hex 0D)
<LF> = Line Feed (Hex 0A)
A/V Switching Commands
Note: Switching A/V inputs via RS232 requires the switching mode to be set to MANUAL switching mode
Description
Switches input to HDMI 1
Switches input to HDMI 2
Switches input to HDMI 3
Switches input to HDMI 4
Enables auto switching mode
Enables manual switching mode
12
RS232 Control Commands
Command
>>HDMI1
>>HDMI2
>>HDMI3
>>HDMI4
>>AUTO
>>MANUAL
Example
Command: >>HDMI1<CR><LF>
Return: <<HDMI1<CR><LF>
Command: >>HDMI2<CR><LF>
Return: <<HDMI2<CR><LF>
Command: >>HDMI3<CR><LF>
Return: <<HDMI3<CR><LF>
Command: >>HDMI4<CR><LF>
Return: <<HDMI4<CR><LF>
Command: >>AUTO<CR><LF>
Return: <<AUTO Switch<CR><LF>
Command: >>MANUAL<CR><LF>
Return: <<MANUAL Switch<CR><LF>