DigitaLinx IPEX2100 Series 빠른 설치 매뉴얼 - 페이지 5

{카테고리_이름} DigitaLinx IPEX2100 Series에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DigitaLinx IPEX2100 Series 17 페이지.

IPEX2100 Series Quick Install Guide

Product Overview

IPEX2101 Encoder

The DigitalinxIP IPEX2101 encodes / transmits HDMI video and audio over a 1Gb network infrastructure using

h.264 AVC encoding with a configurable data rate up to 30 Mbps. The IPEX2101 supports video signals up to

1080p@60 Hz. The IPEX2101 outputs two video streams: one multicast IP stream at the native content resolution

and 5 unicast video streams at 352x288 at 5 Hz to easily view a preview of the content on the DigitalinxIP Control

software for Windows and iPad. An analog audio output port de-embeds 2 channel stereo audio from the embedded

HDMI content.

The IPEX2101 supports PoE and can be powered remotely by compatible power source equipment, such as a

PoE Ethernet switch, eliminating the need for a nearby power outlet. Encoding control provides adjustments for

encoding bit rate and quality. The RS232 port operates in a pass-through capacity to control a third party device

such as an A/V switcher or other device.

The IPEX2101 requires an IPEXCB control interface and is compatible with the IPEX2102, IPEX2002 and IPEX2102MV

streaming decoders. Only (1) one IPEXCB control interface is needed for an IPEX2100 matrix system.

IPEX2102 Decoder

The Digitalinx IP IPEX2102 decodes HDMI video and audio over a 1Gb network infrastructure using h.264 AVC

encoding. The IPEX2102 outputs video up to 1080p@60 Hz and can scale the video content either by user defined

preference or automatically based on the native resolution of the connected display while seamlessly switching

between sources. Depending on the needs of the installation, multiple IPEX2102 devices can be configured to

make a video wall up to a 16x16 configuration. An analog audio output port de-embeds 2 channel stereo audio

from the embedded HDMI content, while still passing the audio to the HDMI output.

The IPEX2102 supports PoE and can be powered remotely by compatible power source equipment, such as a

PoE Ethernet switch, eliminating the need for a nearby power outlet. The RS232 port operates in a pass-through

capacity to control a third party device such as a display or projector.

The IPEX2102 requires an IPEXCB control box and is compatible with the IPEX2001 and IPEX2101 streaming

encoders. Only (1) one IPEXCB control interface is needed for an IPEX2100 matrix system.