Epson WorkForce 60 여기에서 시작

{카테고리_이름} Epson WorkForce 60에 대한 여기에서 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson WorkForce 60 4 페이지. User replaceable parts list
Epson WorkForce 60에 대해서도 마찬가지입니다: 빠른 설정 (4 페이지), 사양 (2 페이지), 적합성 선언 (4 페이지), 적합성 선언 (8 페이지), 브로셔 (4 페이지), 부품 목록 (1 페이지)

Epson WorkForce 60 여기에서 시작
Start Here
Read these instructions before using your product.
1
Unpack
USB cable
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2
Turn on
1
Connect the power cable.
Caution: Do not connect to your computer yet.
2
Press the
Power button.
*411961800*
*411961800*
Power cord
3
Install ink cartridges
1
L ift up the printer cover.
2
Open the cartridge cover.
3
S hake the ink cartridges gently 4 or 5 times, then unpack
them.
4
Remove only the yellow tape from each cartridge.
C
aution: Don't remove any other seals or the cartridges may
leak.
5
I nsert the cartridges in the holder for each color. Press
each cartridge down until it clicks.
6
Close the cartridge cover. Press down until it clicks.
7
Lower the printer cover.
8
P ress the Ink button to prime the ink delivery system.
This takes several minutes.
N
ote: Your printer ships with full cartridges and part of the ink
from the first cartridges is used for priming the printer.
C
aution: Don't turn off the printer while it is priming or you'll
waste ink.