Cisco Aironet 350 Series 매뉴얼 - 페이지 6

{카테고리_이름} Cisco Aironet 350 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 350 Series 10 페이지. Managed switches
Cisco Aironet 350 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지), 릴리스 정보 (14 페이지), 빠른 시작 매뉴얼 (16 페이지), 빠른 시작 매뉴얼 (12 페이지), 빠른 시작 매뉴얼 (12 페이지), 빠른 시작 매뉴얼 (2 페이지), 자세히 알아보기 (16 페이지), 빠른 시작 매뉴얼 (5 페이지)

show stack configuration

CBS350-1#

In this example, the Active (Unit 1) switch now uses te3-4 as stack links. These settings will take

effect after the switch reboots.

Step 8 (Optional)

In the Privileged EXEC mode of the switch, save the configured settings to the startup

configuration file, by entering the following:

copy running-config startup-config

CBS350-1#

Step 9 (Optional)

Press Y for Yes or N for No on your keyboard once the Overwrite file [startup-config]... prompt

appears.

Step 10

Reload the switch to apply the configured stack settings by entering the following:

reload

CBS350-1#

Important: When a switch is reloaded, the running configuration file is deleted. Before proceeding

with the reload instructions, make sure to save all the running configuration settings to avoid data

loss.

Step 11

Press Y for Yes or N for No on your keyboard once the Do you want to continue prompt appears.

The Active unit will now reboot. You should now have configured the stack settings of your active

unit.

Configure Stack Settings on the Standby or Member Switch

Step 1

you have configured a new username or password, enter the credentials instead.

The available commands may vary depending on the exact model of your device. In this example,

CBS350-48MP switch is used.The hostname of the Standby switch is CBS350-2.

Step 2

Enter the Global Configuration mode of the switch by entering the following: