DigitaLinx DL-1H1V1U-WP-W 소유자 매뉴얼 - 페이지 12

{카테고리_이름} DigitaLinx DL-1H1V1U-WP-W에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DigitaLinx DL-1H1V1U-WP-W 19 페이지.

DL-1H1V1U-WP-W Owners Manual

RS232 / CEC Control Configuration

To configure control so a connected display can be controlled by the wall plate, connect the DL-1H1V1U-WP-W

USB service port to a local computer using a micro USB to USB A cable. Use a RS232 scripting tool like Putty

or Docklight to issue the commands in this guide to set the CEC and RS232 settings according to the displays

manufacturers instructions.

RS232 Settings: 11520 baud, 8 Data bits, 1 Stop bit, Parity = None

The commands are case sensitive

All responses end in a carriage return (hex 0D) and a line feed (hex 0A).

= Carriage return (Hex 0D)

<CR>

= Line Feed (Hex 0A)

<LF>