Cisco Aironet 600 Series 사용자 설명서 - 페이지 15

{카테고리_이름} Cisco Aironet 600 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 600 Series 44 페이지. Officeextend access point
Cisco Aironet 600 Series에 대해서도 마찬가지입니다: 구성 매뉴얼 (4 페이지)

페이지 인쇄

Access Point GUI

This chapter provides the following information:

•

Accessing the GUI

Follow these steps to access the Cisco Aironet 600 Series OfficeExtend access point GUI.

Step 1

Connect your laptop to the local Ethernet port 1, or 2 on the 600 Series OfficeExtend access point.

Note

With the 600 Series OfficeExtend access point connected to your home router/gateway as described in

Step 2

the procedure

OfficeExtend access point in the Address field of your Internet browser (http://<ap-ipaddress>) and

click Go.

Note

The 600 Series Office Extend Access Point Login page is displayed.

When prompted, enter the username and password to log into the access point.

Step 3

Note

OL-29882-03

Accessing the GUI, page 2-1

Home Page, page 2-2

Configuration Page, page 2-4

Event Log Page, page 2-13

Network Diagnostics, page 2-13

Ethernet port 4 (Remote LAN port) may not be used to configure the 600 Series OfficeExtend

access point.

"Installing the Access Point" section on page

The default IP address is 10.0.0.1.

Make sure your laptop is not connected to your company's network using a virtual private

network (VPN) connection.

The default username and password are admin and admin.

C H A P T E R

1-4, enter the IP address of the 600 Series

Cisco Aironet 600 Series OfficeExtend Access Point User Guide

2-1