ACU-RITE 00828BPDI 사용 설명서 - 페이지 11

{카테고리_이름} ACU-RITE 00828BPDI에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ACU-RITE 00828BPDI 14 페이지. Weather forecast station

Calibrate Barometric Pressure

The weather station default pressure mode is "AUTO". In auto mode, the

pressure will calibrate itself over a 14 day Learning Mode. Barometric pressure

can be manually calibrated:

1. Press AND HOLD the " " button for at least 10 seconds to enter manual

pressure mode.

2. The un-calibrated pressure will be displayed. Press AND HOLD the " ",

" ", and "

3. Press the " " or " " buttons to calibrate the pressure higher or lower.

4. Press the "

" button to confirm the calibration adjustment. Note: The "

icon will remain illuminated next to the calibrated value.

After 20 seconds of inactivity, the display will save your adjustments and exit

calibration mode. Note: Calibration will be erased if the display is reset or if

batteries are removed.

To exit manual pressure mode and return to auto mode press and hold the

" button for at least 10 seconds.

Replace Intelli-Time Battery

This device comes with a factory

installed "CR2032" coin-cell battery

that powers the Intelli-Time memory.

If the display unit sits without power

for a long period of time, the coin-

cell battery may need to be replaced

to ensure the Intelli-Time feature

functions properly.

To replace the battery, remove small

screw to gain access to the Intelli-Time

battery compartment. Install battery

with "+" positive terminal facing

OUT.

" buttons for at least 5 seconds.

CR2032