Cisco Aironet AIR-AP1230B 사용자 설명서 - 페이지 22

{카테고리_이름} Cisco Aironet AIR-AP1230B에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet AIR-AP1230B 36 페이지. Aironet 1100/1200 series

3. Place the card in an anti-static bag.

Installing the 802.11g Radio Card

Follow these steps to install the 802.11g radio card:

1. Carefully remove the radio card from its anti-static bag.

2. Grasp the card by its edges, being careful not to touch components on

the card or the gold connector pins.

3. Carefully connect the black wire's antenna connector to the radio card

antenna connector marked J2 (the connector on the outside of the card).

4. Carefully connect the white wire's antenna connector to the radio card

antenna connector marked J1 (the connector on the inside of the card)

connector).

5. Insert the radio card into the access point's mini-PCI connector by

following these steps:

a. Tilt the card at approximately 20 to 30 degrees so that its gold pins

are aligned with the mini-PCI connector.

b. Insert the card into the mini-PCI connector and gently push the card

until it is firmly seated as shown in the following illustration.